Dimas FS 400 Instrucciones de operaciones descargar pdf (Pagina 25)

• Hold the position of the machine, release the

lever by pressing on the button (H).

• Lower the blade to the desired depth indicated

on the side scale on the ratchet placed on the

side. We recommend a slow descent to avoid

stalling the engine.

• Start moving down to the depth of cut required,

indicated on the gradiated scale fitted on the

side. A slow descent is recommended to prevent

stalling the motor.

• Once the required depth is reached, lock the

lever (by releasing the button) in the appropriate

notch (F).

Ensure that the water supply is abundant,

when cutting wet.

English

• Release the lever (by pressing simultaneously on

the button) and pull it towards you to release the

blade from the groove.

• Lock the machine in the high position by means

of the lever (by releasing the button).

• Turn off the water supply.

• Allow the engine to turn at low speed.

• Stop the engine (consult the engine maintenance

manual).

8 Stopping the machine

Emergency stop

(engine) :

Operate the switch on the machine's

control panel.

Emergency stop

(electric motor) :

Press the red knob (circuit breaker)

Motor off.

• Several causes can result in the blade stopping

in the sawing groove or the machine stopping:

■ Tension of the belts,

■ Lack of fuel,

■ Excessively fast feed or descent, etc.

• In all cases remove the blade from the groove

and check the machine thoroughly.

Entrust repairs to authorised dealer

only

9 Incidents during sawing

• After use, clean the machine.

• Lubrication: apply a moderate amount of bearing

lubricant to the nipples in the depth adjustment

chassis (depending on the frequency of use).

10 Maintenance (with the engine stopped)

"Engine Maintenance" : refer to the

engine maintenance booklet.

OIL

• Check ENGINE OIL daily. Read engine owners

manual for OIL and OIL FILTER change

intervals. Use :

■ SAE 10W30 motor oil with API class MS, SD,

SE or better for PETROL engines.

■ API class CD or CE for Hatz diesel.

• To empty the motor, place a funnel at the drain

outlet (V) [

FIG.X5].

Dispose of the old oil as laid down by

the regulations in force.

AIR FILTER

• Read engine owners manual for maintenance

intervals. For extremely dusty conditions you

may have to clean the air filter element 2 to 3

times a day.

• Replace any damaged filters or gaskets.

Store in a safe place out ot reach of

children.

Remove all adjustment tools and

wrenches

Store diamond tool in a safe place so

it cannot be bent or damaged.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 50 51

Comentarios a estos manuales

Sin comentarios

Dimas FS 400 Instrucciones de operaciones Pagina 25

Comentarios a estos manuales