Dimas FS 350 Manual del operador descargar pdf (Pagina 18)

TYPETYPE SERIAL

POWER

VOLTAGE

FREQUENCY

INTENSITY

FABRICATION

YEAR

WEIGHT

MAXI TOOL

BORE

SPEED

MANUFACTURER

MASSE UTILE Kg

Ø MAXI OUTIL.

Ø ALESAGE

T/MN - RPM

N° SERIE

ANNEE DE

FABRICATION

PUISSANCE kW

PLAGE DE

TENSION

FREQUENCE

INT. UTIL.

Instruction plate

English

Description of the machine

[FIG. 1]

• Depth of cut : 185 mm

• Nominal weight (empty) :

170 to 267 kg (depending on version)

• Operating weight :

240 to 317 kg (depending on version)

•

Dimensions (L x W x H) : 1300 x 600 x 1100 mm

• Blade shaft RPM : 2500

• Blade : Ø 500

• Tank : 60 litres

Technical specifications

• Use : sawing of fresh or old concrete and

coated materials (asphalt).

• Tools : Diamond Blades - Water cooled -

Øx450xmm - Bore 25.4 mm

(Information from your usual supplier)

Use

Switch off the disk prior to moving

the machine on jobsite.

Remove the disk prior to hoisting,

loading, unloading and transporting

the machine on jobsite.

SPECIAL INSTRUCTIONS

The disc cutter is designed to provide safe

and reliable service in operating conditions

corresponding with the instructions, but it

can present dangers for the user and risks

of damage, consequently regular on site

inspection is necessary to ensure :

• Perfect technical condition (use for the

purpose for which it is intended and

taking into account any risks, and

correction of any malfunction

detrimental to safety).

• Use a diamond disk for cutting with

water (sawing new or old concrete,

tarmac or asphalt). No other type of

disk is allowed (abrasive, saw, etc . . .).

• Competent staff (qualifications, age,

training) who have read and

understood the manual in detail before

starting work: any electrical,

mechanical or other problem should be

investigated by a qualified

maintenance engineer (electrician,

maintenance manager, approved

dealer, etc . . .).

• That the warnings and instructions

marked on the machine are followed

(adequate personal protection, correct

use, general safety instructions, etc).

• That no modification, transformation or

addition is detrimental to safety and

that it is carried out without prior

authorization from the manufacturer.

• Respect of the maintenance intervals

and periodical checks recommended.

• That only genuine spare parts are used

for repairs.

FAILURE TO COMPLY WITH

THESE WARNINGS COULD

RESULT IN DEATH OR SERIOUS

BODILY INJURY.

1- Steering column

2- Speed control

3- Column

4- Water intake tap

5- Fixed and removable disk guard

6- Front guide

7- Wheel (blade lowering)

8- Wheel lock

9- Motor

10 - Belt guard

11 - Belt casing

12 - Belt tension

13 - Tank

14 - Parking brake

15 - Engine oil drain

16 - Lifting ring

17 - Emergency stop

18 - Block (shaft)

19 - Battery isolation switch

20 - Starting switch

AUTOMATIC ADVANCE

21 - Controller

22 - Control light

23 - Potentiometer

24 - Emergency stop

25 - Clutch lever

26 - Locking lever

Handling - Transport

(blade dismantled)

• For positioning the saw on site, it is

sufficient to push it. It moves easily on its

four wheels, without switching on the

motor.

• Parking brake : push the brake lever (14)

[see fig. 1] to block the rear wheels

(pushed version). Automatic version :

release the locking lever (25) (see Fig. 1)

to engage forward motion.

DO carefully read and understand all the

instructions before operating the

saw.

DO always keep all guards in place.

DO aways wear safety approved

hearing, eye, head and respiratory

protection.

DO keep all parts of your body away

from the blade and all other moving

parts.

DO know how to stop the saw quickly in

case of an emergency.

DO shut off the engine and allow it to

cool before refueling.

DO inspect the blade, flanges and shafts

for damage before installing the

blade.

DO use only blades marked with a

maximum operating speed greater

than the blade shaft speed.

DO use caution and follow the

instructions when loading and

unloading the saw.

DO NOT allow other persons to be near

the saw when starting, refueling

or when cutting.

DO NOT run petrol or diesel engines in

an enclosed area unless there

is adequate ventilation.

DO NOT use damaged equipment or

blades.

DO NOT operate the saw in areas of

combustible material. Sparks

from the saw could cause a fire

or an explosion.

DO NOT allow blade exposure from the

guard to be over 180 degrees.

DO NOT leave the saw unattended with

the motor running.

DO NOT operate the saw while under the

influence of drugs or alcohol.

This symbol indicates that the

machine is in conformance with

the applicable European directive.

DO NOT

HONDA

GX 390 109 92 0.85

C4 - 9.6 /13

HONDA

GX 620 104 86 0.33

C4 - 14.7 /2.0

HATZ

1D 50Z 107 89 0.97

7.8/11

HATZ

1D 81Z 106 90 0.55

11/15

ELECT.

400 V 99 82 0.23

11/15

MODEL

POWER

LEVEL

MODEL /

KW / BHP

PRESSURE

LEVEL

VIBRATION

LEVEL

Lwa (dB)

EN ISO 3744

Lpa (dB)

EN ISO 4871

EN V 25349

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

Comentarios a estos manuales

Sin comentarios

Dimas FS 350 Manual del operador Pagina 18

Comentarios a estos manuales

Relacionado con productos y manuales para Sierras circulares Dimas FS 350